User manual

LED Status Description

PWR On Power is on.

Off Power is off.

CPU On The router is initializing.

Flashing The router is operating properly.

Off The router is experiencing a hardware error.

WL Flashing The wireless radio function is enabled.

Off The wireless radio function is disabled.

WAN On There is a device linked to the port, but no activity.

Flashing There is an active device linked to the port.

Off There is no device linked to the port.

1/2/3/4 On There is a device linked to the port, but no activity.

Flashing There is an active device linked to the port.

Off There is no device linked to the port.

1 hardWare

1.1 Front Panel / LEDs

The front panel of the Wireless G Broadband Router

features several

LEDs for immediate indication of the device’s operational status.

1.2 Rear Panel / Ports & Jacks

The rear panel of the

Wireless G Broadband

Router features these ports

and jacks (left to right):

• Power adapter jack. NOTE: Only use the power adapter included

with the Wireless G Broadband Router, as a different adapter could

result in product damage.

• WAN RJ-45 port for connecting the router to a cable, DSL modem or

Ethernet.

• Four LAN 10/100 Mbps RJ-45 ports for connecting the router to local

PCs.

• Factory default reset button (recessed). NOTE: To reset to factory

defaults, rst turn the router on. Next, press in and hold the reset

button for approximately 20 seconds. Then release the reset button

and wait for the router to reboot.

1.3 System Requirements

Proper use of the Wireless G Broadband Router requires the following

system components and connections: