User manual

31
WEB CONFIGURATION
5. When the procedure is complete, the HDD LED will turn off and the disk status
will show that the system is ready.
NOTE: Clicking “Remove system data” or “Remove raid system” will erase all data!
Only use these if you need to set up a different RAID system.
4.2.5.3 Firmware Upgrade
In this section, you can check the current rmware version and upgrade if a new
one is available. Download the latest rmware and store it on your computer, then
browse for the *.gz le, select it and start the upgrade. The upgrade process takes
about 10-20 minutes.