User manual

2 2
ENGLISH
Rackmount LCD Console KVM Switch • User Manual English
INTRODUCTION
Thank you for purchasing the Intellinet Network Solutions Rackmount LCD Console KVM Switch, Model 506540, 507059, 507172 or
507219. For a full list of specifications, refer to the datasheet available at intellinet-network.com.
Package Contents
• Rackmount LCD Console KVM Switch
- Model 506540: 8-Port Rackmount LCD Console KVM Switch, 17”
1.8 m (6 ft.) PS/2 and USB combo cables (8)
- Model 507059: 16-Port Rackmount LCD Console KVM Switch, 17”
1.8 m (6 ft.) PS/2 and USB combo cables (16)
- Model 507172: 8-Port Rackmount LCD Console KVM Switch, 19”
1.8 m (6 ft.) PS/2 and USB combo cables (8)
- Model 507219: 16-Port Rackmount LCD Console KVM Switch, 19”
1.8 m (6 ft.) PS/2 and USB combo cables (16)
• Rear bracket and extension kit
• KVM switch module
• Power adapter
• User manual
INSTALLATION
To install the Rackmount LCD Console KVM Switch in a rack unit, begin by removing the brackets if the device is already assembled.
1. For both the left and right bracket assemblies, screw the front
of the bracket to the rack, then extend the bracket and attach
it to the back of the rack.
2. Carefully place the switch on the mounted brackets and
loosely attach the front of the switch to the front of the rack
using the included screws.
3. Move the rear attachment brackets along the slide bars until
they contact the back of the switch.
4. Attach the bars to the back of the switch.
506540_507059_507172_507219_07_man_ML1.indd 2 9/29/14 2:30 PM