User manual

Name is the administrator name of the print server. If you change the name, you

need to log in to the print server from the administrator utility or Web management

with the new name. The default user name is “admin.”

Password: Enter the password you want to change for the print server. The

password can be up to an 8-digit alphanumeric format. The default password is

“1234.”

Re-type Password: Enter the password you want to change for the print server

again.

8.4.1.2 Advanced Settings

This screen allows you to enable/disable the printing protocol.

To enable the function, select “Enable”; to disable the function, select “Disable.”

8.4.2 Wireless

If you want to use the print server through a wireless LAN, set up the print server

through the Ethernet rst and make sure your wireless LAN setting is correct. After

setting the wireless LAN, unplug the Ethernet cable and restart the print server.

You can then start to use the print server through the wireless LAN. If the wireless

conguration doesn’t work, plug the Ethernet cable in again, restart the print server

and congure the print server through the Ethernet until the wireless LAN settings

are correct.

You can set parameters that are used for the wireless stations — including Function

and ESSID — to connect to this print server. You can manually set the parameters

of a wireless LAN on this screen or use the Site Survey function to automatically

search for an available access point and associate with it.

Mode is the operation mode of wireless station. If you’re using an access point in

the wireless LAN infrastructure, the wireless mode is Infrastructure.

ESSID is the unique name identifying a wireless LAN. The ID prevents the

unintentional merging of two co-located WLANs. Make sure that the ESSID of all

WEB MANAGEMENT