User manual

polling
Polling interval (in second) of the
print server for waiting printing
jobs on the NetWare server
set polling 3
aq1
Name of the printer queue on the
NetWare server
set aq1 PQ1
applezone
The name of AppleTalk zone that
this print server joins to
set applezone *
printertype1
The type of the printer attached to
this print server
set printertype1 LaserWriterLaserWriteraserWriter
SMBDG
The name of the SMB group
name that this print server joins to
set SMBDG default
SNMPC
The administrator contact
information of this print server for
SNMP
set SNMPC sbdjohn@hotmail.
com
SNMPL
The installed location of this print
server for SNMP
set SNMPL Room 301
port1
The port name of this print server set port1 p1p11
DHCPS
Enable or disable the DHCP
server.
The value should be “disabled” or
“enabled.”
set DHCPS disable
DHCP
Enable or disable to get dynamic
IP by DHCP.
The value should be “disabled” or
“enabled.”
set DHCP disable
appletalk
Enable or disable AppleTalk
printing
The value should be “disabled” or
“enabled.”
set appletalk disable
SMBD
Enable or disable SMB printing
The value should be “disabled” or
“enabled.”
set SMBD enable
SNMP
Enable or disable SNMP
management protocol
The value should be “disabled” or
“enabled.”
set SNMP enable
IPX
Enable or disable NetWare
Bindery printing
The value should be “disabled” or
“enabled.”
set IPX enable
LPD
Enable or disable LPR printing
The value should be “disabled” or
“enabled.”
set LPD enable
IPP
Enable or disable IPP printing
The value should be “disabled” or
“enabled.”
set IPP enable
9.5 Other Commands
ipcong — quickly gets the IP settings (IP address, subnet mask, default gateway)
of the print server:
admin# ipcong

IP_ADDR=192.168.2.2
SUBNET_MASK=255.255.255.0
DEFAULT_GATEWAY=192.168.2.254
reboot — restarts the print server
exit — leaves the print server Telnet management program
help — lists all Telnet management commands of the print server
67
TELNET MANAGEMENT