User`s manual

2.5.2 Client Filtering
If you want to restrict users from accessing certain Internet applications/services (e.g. Internet
websites, email, FTP etc.), then this is the place to set that configuration. Client Filtering allows
users to define the traffic type permitted in your LAN. You can control which PC client can have
access to these services.
Parameters Description
Enable Client Filter Check this box to enable Client Filtering function.
IP Enter the client IP range that you want to filter.
Port Enter the port range of services that you want to
restrict the clients to access.
Type Select the protocol type of services that you want to
restrict the clients to access.
Block Time Select “Always” if you want to block the clients
from accessing the services all the time. Select
“Block” if you want to block the clients from
49