User manual

11
QUICK INSTALLATION
IP Address: Enter the router’s LAN port IP address (your LAN clients’
default gateway IP address).
Subnet Mask: Specify a subnet mask for your LAN segment.
Click “Next” to proceed to the next screen.
2.3 WAN Interface
On this screen, select one of the four types of connections you’ll be
using — Static IP, DHCP Client, PPPoE or PPTP (as explained in the
subsections below) — to connect your router’s WAN port to your ISP.
NOTE: Different Internet service providers require different Internet
connection methods. Check with your ISP as to the type of connection
that is required.
WAN Access Type: Select one of the four connection options from
the drop-down menu, then click “Next” to proceed to the screen of
the selected connection type.
Static IP — Your ISP has given you an IP address already.
DHCP Client — Your ISP will automatically give you an IP address.
PPPoE — Your ISP requires you to use a Point-to-Point Protocol
over Ethernet (PPPoE) connection.
PPTP — Your ISP requires you to use a Point-to-Point Tunneling
Protocol (PPTP) connection.