User manual
14
QUICK INSTALLATION
Subnet Mask: Enter the ISP-provided subnet mask; e.g.,255.255.255.0.
Server IP Address: Enter the IP address of the ISP gateway.
User Name: Enter the username provided by your ISP for the PPTP
connection (sometimes referred to a the connection ID).
Password: Enter the password provided by your ISP.
Click “Next” to proceed to the next screen.
2.4 Wireless Basic Settings
This screen displays when you click “Next” after conguring any of the
four WAN interfaces above.
Band: This allows you to set the router (acting as an access point) as
802.11b or 802.11g mode. You can also select B+G mode to allow
the AP to select either 802.11b or 802.11g automatically.
SSID: Enter a name for the wireless LAN. All the devices in the same
wireless LAN should have the same ESSID.
Channel Number: Select the channel to be used by the wireless LAN.
All devices in the same wireless LAN should use the same channel.
Enable MAC Clone: Select to allow the router to copy the rst seen
MAC address to the WLAN MAC.
Click “Next” to proceed to the next screen.