User manual

GENERAL SETUP

that support UPnP smoothly connect to Internet sites without any

incompatibility problem due to the NAPT port translation.

Enable Web Server Access on WAN Port: Enter where to start the

Web server access on the WAN when you want to access the Web-

based management from a remote site.

Enable FTP ALG on Port: The FTP Application Layer Gateway is

used to manage the File Transfer Protocol (FTP). FTP uses two

communication channels: one for control commands and one for

the actual les being transferred. When an FTP session is opened,

the FTP client establishes a TCP connection (the control channel),

usually to Port 21 on the FTP server. You can specify the port here.

Enable IPsec/PPTP/L2TP pass through on VPN connection: Check

to select these options if you need to create VPN connections to a

remote location, such as your ofce. If you’re not sure which of the

protocols you need, you may activate all three.

Click “Apply” to save the congurations.

3.2.2 DHCP Client

This is similar to the DHCP Client screen in Quick Installation, but some

ISPs may require additional information beyond the hostname.