User manual
27
GENERAL SETUP
• Manual — Only connects to the Internet when “Connect” is
clicked; disconnects when “Disconnect” is clicked.
Idle Time: Specify the amount of Internet-inactivity time that needs to
elapse before shutting down. NOTE: This option is only available
when “Connect on Demand” is selected.
MTU Size: Enter the MTU value of your network connection. If unknown,
you can use the default value.
Obtain DNS Automatically: Select if your ISP requires you to obtain
a DNS via the DHCP server before you connect to the Internet.
Set DNS Manually: Select if your ISP gives you a static DNS server
for connecting to the Internet.
DNS 1: Enter the IP address of the DNS server provided by your ISP.
DNS 2/3: Enter IP addresses of other DNS servers provided by your ISP.
Clone MAC Address: Enter the MAC address of your computer if your
service provider only permits computers with certain MAC addresses
to access the Internet.
NOTE: The remaining features/options are identical to those in the
Static IP section above.
Click “Apply” to save the congurations.
3.2.4 PPTP