User manual
33
GENERAL SETUP
wireless LAN should have the same ESSID. The default entry is
“INTELLINET.”
Channel Number: Select a wireless LAN channel. All devices in the
same wireless LAN should use the same channel. The default is 11.
Associated Clients: Click “Show Active Clients” to display the Active
Wireless Client table, which shows the status of all active wireless
stations that are connecting to the router (as an access point).
Click “Apply” to save the congurations.
3.4.2 Advanced Settings
You can set advanced wireless LAN parameters in this section; however,
changes aren’t recommended unless you know what effect the changes
will have on this router.
Authentication Type: There are three authentication options:
• Open System — This allows wireless stations to associate with
the router without WEP encryption.