User manual
35
GENERAL SETUP
Turbo Mode: This enhances the data transfer rate of a WLAN (up to
35 Mbps). The default setting, “Auto,” is recommended.
Click “Apply” to save the congurations.
3.4.3 Security
As an access point, the Wireless G 4-Port Router provides complete
wireless LAN security functions — WEP, IEEE 802.11x, IEEE 802.11x
with WEP, WPA with pre-shared key and WPA with RADIUS — which
protect your wireless LAN from illegal access. Make sure your wireless
stations enable the same security function.
Encryption: Mode options are “None,” “WEP,” “WPA,” “WPA2” and
“WPA2 mixed.” If WEP encryption is selected in the drop-down menu,
click “Set WEP Key” and select either “WEP 64 bits” (which is the
default setting) or “WEP 128 bits.” The larger key length provides a
higher level of security, but the throughput will be lower.
Use 802.1x Authentication: IEEE 802.1x is an authentication protocol.
Every user must use a valid account to log in to this access point