User manual

41
GENERAL SETUP
remove an item from the list, highlight it and click “Delete Selected”
(or “Delete All” if you’ve highlighted more than one). To clear all
current selections, click “Reset.” To clear all current text elds, click
“Cancel.”
3.5.5 Port Forwarding
This section allows you to re-direct a particular range of service port
numbers (from the Internet / WAN ports) to a particular LAN IP address.
This helps you host some servers behind the router’s NAT rewall.
Enable Port Forwarding: Select to activate the function.
IP Address: Enter the private IP address of the server behind the NAT
rewall. NOTE: You need to give your LAN PC clients a xed/static
IP address for Port Forwarding to work properly.
Protocol: Select the protocol type to be forwarded: “TCP” or “UDP,” or
both.
Port Range: Enter the range of ports to be forwarded to the private IP.
Comment: Enter a description of the item being ltered, then click “Apply.”
Once one or more items are listed, the resulting Current Port
Forwarding Table list will display at the bottom of the screen. To
remove an item from the list, highlight it and click “Delete Selected”
(or “Delete All” if you’ve highlighted more than one). To clear all
current selections, click “Reset.” To clear all current text elds, click
“Cancel.”