User manual
6
HARDWARE
LED Status Description
PWR On Power is on.
Off Power is off.
WLAN On The Wireless LAN has been activated.
Flashing There is Wireless LAN activity (transferring or
receiving data).
Off The Wireless LAN has been deactivated.
WAN On The WAN has been connected.
Flashing There is WAN activity (transferring or receiving data).
Off There is no WAN connection.
1/2/3/4 On The LAN has been connected.
Flashing There is LAN activity (transferring or receiving data).
Off There is no LAN connection.
1 hardware
1.1 Front Panel / LEDs
The front panel of the Wireless G 4-Port Router
features LEDs that
provide an immediate
indication of the device’s
operational status.
1.2 Rear Panel / Ports & Jacks
The rear panel of the
Wireless G 4-Port
Router features these
ports, buttons and jacks (left to right):
• Four LAN 10/100 Mbps RJ-45 ports for connecting the router to local
PCs.
• WAN RJ-45 port for connecting the router to a cable, a DSL modem
or the Ethernet.
• Reset button (recessed), which allows you to do two things:
1. If problems occur with your router, press the button with a pencil
tip (for no more than 4 seconds) and the router will re-boot itself,
keeping your original congurations.