User manual

55
Below are descriptions of each option:
Primary DNS (1): Enter the IP address of the DNS server
provided by your service provider.
Secondary DNS (2): Enter the IP address of another DNS server
provided by your service provider (this is
optional).
After you finish the settings, click “Apply” (3) and the following
message will be displayed on your Web browser:
Click “Continue” to go back and continue with the router setup
procedure, or click “Apply” to reboot the router so the settings will
take effect. (Wait for about 30 seconds while the router is
rebooting.)
If you want to reset all settings on this page back to previously
saved values, click “Cancel.”
NOTE: Only an IP address can be entered here; DO NOT use the
hostname of the DNS server! (i.e., only numeric characters and dots
are accepted)
10.20.30.40……………………………………………………………… Correct
dns.serviceprovider.com…………………………………………... Incorrect