User manual

68
Below are descriptions of the options:
Fragment Set the threshold of the wireless radio.
Threshold (1): Do not modify the default value if you don’t
know what it does (default value is 2346).
RTS Threshold (2): Set the RTS threshold of the wireless radio. Do
not modify the default value if you don’t
know what it does (default value is 2347).
Beacon Interval (3): Set the beacon interval of the wireless radio.
Do not modify the default value if you don’t
know what it does (default value is 100).
DTIM Period (4): Set the DTIM period of the wireless radio. Do
not modify the default value if you don’t
know what it does (default value is 3).
Data Rate (5): Set the wireless data transfer rate to a certain
value. Since most wireless devices will
negotiate with each other and pick a proper
data transfer rate automatically, it’s not
necessary to change this value unless you
know what will happen after modification.
N Data Rate (6): Same as above, but only for 802.11n clients.
Channel Width (7): Set the channel width. Do not modify the
default value if you don’t know what it does
(default setting is “Auto 20/40 MHz”).
Preamble Type (8): Set the type of preamble. Do not modify the
default value if you don’t know what it does
(default setting is “Short Preamble”).
Broadcast ESSID (9): Decide if the wireless router will broadcast its
own ESSID or not. You can hide the ESSID of