User manual

108
server become unusable. Check this box and
the router will filter this kind of traffic out.
Advanced Click this button and you can set advanced
Settings (5): settings of the DoS prevention method listed
above (see section 3-3-3-1 DoS – Advanced
Settings below).
After you finish the settings, click “Apply” (9) and the following
message will be displayed on your Web browser:
Click “Continue” to go back and continue with the router setup
procedure, or click “Apply” to reboot the router so the settings will
take effect. (Wait for about 30 seconds while the router reboots.)
If you want to reset all settings on this page back to previously
saved values, click “Cancel.”
3-3-3-1 DoS - Advanced Settings
Click “Advanced” in the DoS menu and the following message will
be displayed on your Web browser: