Quick Installation Guide AC600 USB 2.
Catalogue Product Introduction .................................................................................................. 1 Package Content ....................................................................................................... 2 Hardware Installation ................................................................................................ 3 Appendix .....................................................................................................................
Product Introduction Product Overview This is a dual band 600M 802.11ac Wireless USB Adapter, backward compatible with 802.11a/b/g/n, it supports selectable 2.4GHz or 5GHz, adopting 1 × 1 MIMO (Multiple Input Multiple Output) architecture, 5G(802.11ac) up to 433 Mbps data rate ，2.
Package Content Package Content AC600 Wireless Dual Band USB adapter Quick Installation Guide If any of the above is omitted, please contact your distributor 、 Friendship Prompt Supported operating systems：XP/Vista/7/8/10, Mac, Linux.
Software Installation Windows7(As a example) 1 Open the browser, and enter http://www.fullriver.com.cn/ and then press "Enter". Click to download the driver installation package. 2 Click“Device Manager>Network Adapters”，Check information before installation. 3 Double-click ，The driver starts installing the following installation wizard.
4 Click .Please wait patiently. 5 The install is succeed,click You will enjoy the many advantages of joining a LAN card.
Appendix Hardware Specifications IEEE 802.11a, IEEE 802.11b ,IEEE 802.11g, Standards and Protocols IEEE 802.11n,IEEE802.11ac Operating Frequency 2.4 ~ 2.4835GHz 5.15 ~ 5.25GHz 5.725 ~ 5.825GHz Signal Rate 2.4G up to 200Mbps 5G up to 433Mbps Modulation IEEE 802.11b: CCK，QPSK，BPSK IEEE 11g/a: OFDM IEEE 11n:QPSK，BPSK，16-QAM，64-QAM Transmit Power IEEE 11ac:BPSK，QPSK，16QAM，64QAM，256QAM ≦20dBm Interfaces USB 2.0,USB1.1 Standard Antenna 1*2dBi 2.5&5G built-in antennas Dimensions (L × W) 18.8*14.5*6.
FCC ID: 2ADQY-525558 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
