Datasheet

16-Port Fast Ethernet PoE+ Switch
16 x PoE IEEE 802.3at/af Power-over-Ethernet (PoE+/PoE) ports, Endspan, 19"
Rackmount
Part No.: 560849
Deliver Power over Ethernet to remote devices.
The Intellinet PoE+ Office Switch, Model 560849, is equipped with 16 10/100Base-TX Fast
Ethernet ports, all of which support 802.3af/at Power over Ethernet (PoE/PoE+). Besides
being a versatile network LAN switch, it also provides a Power over Ethernet option that
supplies power injection to 802.3af/at-compliant devices, such as IP phones, wireless
access points and network cameras.
Power over Ethernet 802.3at
The Intellinet 16-Port Fast Ethernet Rackmount PoE+ Switch supports the IEEE 802.3at protocol and is designed to inject
up to 30 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no
additional power, thus eliminating the time and expense of electrical rewiring and minimizing the unsightly clutter caused
by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is
supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected.
For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of
an Intellinet PoE/PoE+ Splitter.
Optimum Performance
Besides providing Power over Ethernet functionality, the PoE Office Switch has some very impressive features as a
switch. For starters, the auto features of this switch make installation Plug and Play and hassle free. No configuration is
required. Auto-MDI/MDI-X crossover on all ports eliminates the need for crossover cables for connection to another
switch or hub. Auto-negotiation on each port senses the link speed of a network device (either 10 or 100) and intelligently
adjusts for compatibility and optimal performance.
* Total PoE budget for this switch is 123 watts. Per-port average power distribution is 7.6 watts; maximum per-port power
usage cannot exceed 30 watts.
Features:
Save time and money by delivering data and power via existing network cables
IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output ports
Power output up to 30 watts per port*
PoE power budget of 123 watts
All RJ45 ports with Auto-MDIX and NWay auto-negotiation support
10/100 auto-sensing ports automatically detect optimal network speeds
Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access
points, VoIP phones, IP cameras)
Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage
protection
Store and forward switching architecture
Full/half duplex operation
For more information on Intellinet products, consult your local dealer or visit www.intelllinet-network.com.
All names of products or services mentioned herein are trademarks or registered trademarks of their respective owners. Distribution and
reproduction of this document, and use and disclosure of the contents herein, are prohibited unless specifically authorized.

Summary of content (3 pages)