User manual

 16‐PortGigabitEthernetPoE+Web‐ManagedSwitchwith2SFPPorts
48


Item Description
PortID DisplaystheIDoftheportyouareeditingor“CurPageAllports”ifyouareediting
allportsonthecurrentpage.
Portenable ActivateordeactivatePoEsupport.
PortPriority Youcanchoosefromthreevalues:low,midandhigh.Theprioritycanbeusedto
definewhichportwon’tbereceivingpower,intheeventthatthemaximumPoE
powerhasbeenexceeded.
Example:It'spossibletosetthevalueto"high"forportswithsecuritycameras
connectedtothem.Thisensuresthatthesecameraswillalwaysbesuppliedwith
power,evenifthetotalpowerdrawontheIntellinetswitchexceedsthe
maximumavailablePoEpower.Portsthataresettolowormidwillbe
disconnectedfirst–inthatorder.
Detectionmode SomegoodadviceistoleavethisAT&AF.YoucanenableAF‐onlymode,ifyour
olderIEEE802.3afPoEdevicesarenotabletocommunicatewiththeIntellinetPoE
switch.
Maximumpower Definethemaximumoutputpoweravailablefortheport(s)inrangefrom1to36
watts.

