User manual

 16‐PortGigabitEthernetPoE+Web‐ManagedSwitchwith2SFPPorts
58

6.9 DHCPSERVER
TheDynamicHostConfigurationProtocol(DHCP)isa
standardizednetworkprotocolusedonInternetProtocol(IP)
networksfordynamicallydistributingnetworkconfiguration
parameterssuchasIPaddressesforinterfacesandservices.A
typicalDHCPserverisarouteroraWindowsserver.The
Intellinet16‐PortGigabitEthernetPoE+Web‐ManagedSwitch
canalsofulfilltheroleofaDHCPserver.
6.9.1 DHCPConfig

6.9.1.1 EnableConfig

Setthisoptionto“Open”inordertoactivatetheDHCPserverfunction.Notethatwhenyou
wanttousetheDHCPServerfunction,youcannotusetheDHCPrelayfeature(seesection6.8
DHCPRelayAgent)atthesametime.
6.9.1.2 PoolConfig

Item Description
PoolID IdentifiesthedynamicaddresspoolfromwhichtheDHCPrequestsareserved. 
Domain Ifyouareonadomainnetwork,thedomainnameshouldgohere.
NetworkIP ThisisthefirstIPaddressofthesubnetendingin“.0”.Itcan’tbeassignedtoanactual
networkclient.
NetworkMask Providethenetworkmaskofchoiceforyournetwork.
StartIP DefinethelowestIPaddressoftheIPaddresspool.
EndIP DefinethehighestIPaddressoftheIPaddresspool.
LeaseTime DefineshowlongtheclientisallowedtokeeptheIPaddress.Whenthetimehaselapsed,
theswitchwillissueanewIPaddresstotheclient.
Note:TheDHCPIPaddressrangemustbeinthesamerangeastheIntellinetswitch'sLANIPrange(e.g.,192.168.2.xxx). 