User manual

 16‐PortGigabitEthernetPoE+Web‐ManagedSwitchwith2SFPPorts
64

6.11.2 RadiusServerConfig


Item Description
Serveraddress TypeintheaddressoftheRADIUSserver.
Chargingport TypetheaccountingportnumberontheRADIUSserver’shostcomputer.
Thedefaultportnumberis1813.
Authenticationport TypetheaccountingportnumberontheRADIUSserver’shostcomputer.
Thedefaultportnumberis1812.
Key Thekeyparameterintheradius‐servercommandisusedtoencryptRADIUS
packetsbeforetheyaresentoverthenetwork.Thevalueforthekey
parameterontheIntellinetswitchdeviceshouldmatchtheoneconfigured
ontheRADIUSserver.Thedefaultvalueis“radius”.
Activedetection EnablesordisablesactivedetectionofRADIUSserver.
Testname Theusernameforactivedetection.
Idletime TheintervaltimeforRADIUSsecurityserversendmessageonaccessible
state.Thedefaultvalueis60minutes.Possiblevaluesrangefrom0to1440
minutes(24hours).



