User manual

 16‐PortGigabitEthernetPoE+Web‐ManagedSwitchwith2SFPPorts
7

LEDindicators:
TheLEDindicatorswillallowyoutomonitor,diagnoseandtroubleshootanypotentialproblemwiththeswitch,its
connectionorattacheddevices. 

ThefollowingchartshowstheLEDindicatorsoftheswitchalongwithexplanationofeachindicator.
LED COLOR STATUS STATUSDESCRIPTION
Power Red On PowerOn
Off PowerOff
LINK/ACT/
Speed
(1~16)
10/100Mbps: 
Amber
On Adeviceisconnectedtotheport
Off Nodeviceisconnectedtotheport
1000Mbps:
Green
Flashing Sendingorreceivingdata
SFP1
SFP2
Green On Adeviceisconnectedtotheport
Off Nodeviceisconnectedtotheport
Flashing Sendingorreceivingdata
POE Orange On AnIEEE802.3af/at‐compliantpowereddevice(PD)is
connectedtotheport,andthePoEswitchsupplies
powersuccessfully.
Off Nopowereddeviceisconnectedtotheport.
Flashing TheremaybeashortcircuitorPoEpower
overload.Disconnectthedevicefromthisport
immediately.

Reset   Pressfor15seconds–20secondsinorderto
resetallsettingstofactorydefaultvalues.
Releasethebutton,oncetheLEDsstartflashing.

