User manual

 16‐PortGigabitEthernetPoE+Web‐ManagedSwitchwith2SFPPorts
72

6.14 ADDRESSTABLE
ToswitchdatapacketsbetweenLANportsefficiently,theIntellinetswitchmaintainsanaddresstable.Whentheswitch
receivesaframe,itassociatesthemediaaccesscontrol(MAC)addressofthesendingnetworkdevicewiththeLANport
onwhichitwasreceived.Indoingso,theswitchdrasticallycutsdownonunnecessarynetworktraffic,becauseinsteadof
floodingallLANportsofthesameVLANwiththeinformation,itonlysendsittotheportwheretherecipientis
connected.

6.14.1 AddressTableConfig

6.14.1.1 MACAdd&Delete
Thescreenisdividedintothreesections. 

Section1(“clearMacaddrlist”)allowsyoutocleartheMACaddresstable. 
 
Section2canbeusedtomanuallyenteraVLAN–MACAddress–Portpairing. 
Section3displaysallMACaddressesthatarecurrentlyintheMACaddresstable.
