User manual

- 27 -
6: Administrator Menu
You can control the configurations of the camera using the administrator tools, which can be
accessed only by an authorized user. If non-authorized users try gaining access, you may see a
warning message "You are not an administrator."
6.1 Overview of the Administration Menu
The table below provides a one-step overview of the Administrator Tools:
Image Configuration To Configure compression rate, image size, brightness, contrast, etc.
Network Configuration To configure camera IP, Web server port, image transfer port
User Configuration To configure user ID and password
System Configuration To configure the camera name, location and time settings
Event Trigger Configuration To configure trigger condition, image capture option, trigger output, etc.
Wireless Configuration
(wireless models only)
To configure wireless parameters such as wireless mode, SSID, encryption,
etc.
Return to Live View To go back to the monitoring page
NOTE: It is highly recommended that you change the administrator password for your camera
as soon as possible to prevent unauthorized users from accessing the administrator menu. You
can change the administrator password in the User Configuration.