User manual

15
Date and Time
Current Camera Time
Displays current date and time information based on the settings below.
Time Configuration
(x) Set Manually
You can enter yyyy-mm-dd (year-month-day) for date and hh:mm:ss (hours:minutes:seconds) for time.
Manual time configuration is required if the camera is unable to make a connection to an NTP server,
perhaps because the camera has no access to the Internet and no local NTP Server is present.
(x) Automatically synchronized with NTP server.
Synchronizes the camera's time with that of the NTP (Network Time Protocol) server. This is the
recommended setting, as it makes sure that the time of the camera is always current.
NTP server
Type the host name or IP address of the NTP server, up to 20 characters. A list of free NTP Servers can be
found at http://www.ntp.org.
Time Zone
Select the time zone which best represents the location of the camera.
Adjust clock for Daylight Saving Time
Enter the start day and end day of Daylight Saving Time if desired.
Click on the "Save"’ button to submit the settings to the camera.