User manual

28
Show me detection
When you click on this button, the camera highlights all areas in which motion occurs. You can
use this function to adjust the sensitivity. See the sample image below.
The person moving through the image is detected and the detection is indicated by highlighting the
corresponding grid blocks.
Input port action
The input port option can be used to connect external alarm devices or sensors to the camera to
trigger an action. There are two types of sensors on the market. Some open a circuit in case of an
alarm, while others close a circuit. Specify the trigger state of the input port here.
Timer
Set the time to send an image periodically when the event is triggered.
If you set the timer for every 10 seconds, the captured image is uploaded to the dedicated server
every 10 seconds. Possible values are 0 – 3600 seconds.
Click to "Save" to transfer the settings to the camera.