User manual

30
Security & SNMP
IP filtering use: Deny
Activate the IP Filtering function of the camera. This is a "deny" list, meaning that all IP Addresses you
specify will be disallowed access to the camera.
IP filtering list
You can define up to 10 ranges of IP addresses for which you want to deny access to the High-Speed Dome
Camera.
Enable SNMP V1
SNMP stands for Simple Network Management Protocol. Activate this function if you want to use the
camera's SNMP function.
Read Community
This is the read-only SNMP community string of your network.
Expert Settings (2008 and newer models only)
Cameras manufactured in 2008 and later feature
expert settings which let you control certain
aspects of the camera. Normally it is not necessary
to make any changes here. Find the explanations
of the different options below. Not all cameras have
the same parameters; the features may vary.
Display on/off:
Displays status information such as the preset
number on the live image. Set this value to "off" to
disable this feature. "Auto" means that status
information is only shown while the camera is
moving; "on" means that the information is shown
all the time.
Expert settings shown for 30x Speed-Dome (10x Speed-Dome has slightly different settings)