User manual

33
Maintenance
System Initialization
This page contains a set of tools to perform certain operations.
Restart
If the camera is not behaving correctly, you can remotely reboot the camera using this option. No camera
settings are overwritten during this operation. The entire restart process takes 30 seconds.
Restore
All camera settings are being set back to factory default values – except for:
- the boot protocol (DHCP or static)
- the static IP address
- the default gateway
- the subnet mask
Reset
Pressing this will return all camera settings to the factory default values (including the IP address). This
button should be used with caution!
Export
You can create a dump of the entire configuration and save it on your local hard drive. If you want to restore
the configuration at a later time, perform the function below.
Import
Click the browse button to locate the saved backup file and then click the import button to reload the
configuration.