User`s guide

NETWORK IP CAMERA User’s Guide

4.3 Assigning IP Address by using Hyper Terminal

In case you do NOT assign IP address by using IP Installer, you can assign IP address by using

Hyper Terminal. In this case, you should configure Hyper Terminal condition first.

4.3.1 Configuring Hyper Terminal

Hyper Terminal is a basic program for Windows 9x/NT/2000. PC can communicate with

external devices through the serial port by using this program. The steps you should take to set

the Hyper Terminal are as follows in the case of Windows 2000 OS.

① Start  Programs  Accessories 

Communications  Hyper Terminal. Select

one among the icons and then enter an

appropriate name in the Name edit box.

② Select a serial port of PC, then click “OK”

button. (Usually COM1 or COM2 is

recommended)