User manual

Item Description

Network Type Select “DHCP” to obtain an IP address automatically

or “Static IP Address” to assign the camera a fixed IP

address.

NOTE:

When “DHCP” is selected, the IP address parameters

below are grayed out.

IP Address Specify the IP address here.

Subnet Mask Specify the subnet mask here. The default value

255.255.255.0 will work for most networks.

Gateway Specify the gateway address of the local network here.

Normally this is the IP address of the router in your

network.

Primary DNS Enter the IP address of the DNS server. If you don’t know

it, ask a network administrator or your ISP for help.

Secondary DNS Enter the IP address of a backup server, which

the camera will use if the primary address is unavailable.

(Optional)

AV Control Port Enter the video transfer port number. If you have a

firewall on your network, you need to allow computers on

the Internet to access this port; otherwise, you won’t be

able to view video from the Internet.

Web Port Enter the port number of the Web management interface.

NOTE: If it’s not 80, you need to add “:port” after the

camera’s IP address / hostname. For example, if the

HTTP port number entered here is 90 and the IP address

of the camera is 10.20.20.30, then you need to input

“http://10.20.20.30:90” in the address bar of Internet

Explorer.

Click “Apply” to save the settings.