User manual

Click on ‘Browse’ to select the firmware file, and then click on

‘Upgrade’ to begin the upgrade procedure.

Reset Click to erase all settings and reinstate the camera’s factory

default state. A re-configuration of the camera will be required

after the reset has completed.

Reboot Device Click the button to reboot the camera. This may be useful if the

camera performs poorly, or if you have made changes to some

of the camera’s network settings.

LED Setting You can turn on or off the LEDs (LAN / WLAN) on the front of the

camera. Turn them off if you don’t want other people to see

whether or not the camera is operational. Turn the LEDs on, if

you DO want to show other people that the camera is

operational; e.g., in a retail store to deter theft.