User manual

Input 'ipconfig', then press the 'Enter' key. Check the IP address followed
by 'Default Gateway', in this example, the IP address of the router is
192.168.2.1, please note that this value may be different.
3. Connect the router's management interface by the Web browser
After your computer has obtained an IP address from the router, start your
Web browser, and input the IP address of the router into the address bar.
The following message should be shown:
NOTE: If the IP address of the Gateway is not displayed, or the address
followed by ‘IP Address’ begins with ‘169’, recheck the network connection
between your computer and the router, and go to the beginning of this
chapter to recheck every step of the network setup procedure.