User's Manual

Converge Transmitter

About the Converge Transmitter

The Converge Transmitter can broadcast from virtually any audio source. The Converge Trans-

mitter can be connected to a computer via USB, an external audio source such as an iPod/

iPhone, other digital media players or anything with a headphone jack. The Converge Transmit-

ter can also be connected to a home stereo or home theater system. The output of the Con-

verge Transmitter can be connected to powered multi-media/computer speakers or a home

stereo receiver/amplifier.

Computer USB Connection

Using the included USB cable, plug one end into the Converge Transmitter and the other end

into an available USB port on a computer. Audio input and power to the Converge Transmitter

is supplied through the USB port -- no additional cabling or external power is required.

An auxiliary audio source may also be connected by plugging in the supplied stereo head-

phone cable to the jack on the Converge Transmitter marked AUX IN. The other end of the

cable can be connected to the headphone jack of any external audio device. You may toggle

between inputs by pressing the source button located on the top of the Converge Transmitter.

Powered multi-media/computer speakers can be connected to the Converge Transmitter by

plugging in the stereo jack from the speakers into the jack labeled AUDIO OUT.

IMPORTANT - Set the computer or external audio device’s Volume output to maximum

level. See “Operations” instruction on page 10 of this manual.

COMPUTER

COMPUTER SPEAKERS

TRANSMITTER

USB PORT