User's Manual

Audio Line Inputs and Outputs

The Streaming Music Player features line level inputs and outputs that facilitate virtually any

connection option required.

Zone 1 Output

Zone 1 features a stereo/mono line level outputs for connecting to an amplier. If using a

mono amplier, connect to the Right Channel and select the MONO position on the mode

switch.

Zone 1 Paging Input

When connected to a paging amp or phone system paging output, the line level input will

monitor for audio. If audio is detected on this input, the circuit will interrupt the audio from the

player and play the audio delivered from the Zone 1 paging input. After no audio is detected

for 1 second, audio from the player will resume.

Zone 2 Output

This line level output can be connected to an amplier.

Zone 2 Input

This line level input can be connected to any mono or stereo audio source to be able to play the

audio over the wireless card’s Zone 2. When mono input is used connect to the Right Channel

and select the MONO position on the mode switch.