User's Manual

10
Mounting Options
Wall Outlet Mounting
A unique design feature of the wireless speaker is that it can be plugged into a wall outlet for
mounting. For added support a security wall bracket mount is included in the package. To use
this bracket, see the diagram below.
Mounting
Wall Outlet Mounting on Inverted Outlets
In instances where the wall outlet is upside down (grounding pin at the top of the outlet), the
non-functional grounding pin on the wireless speaker can be removed by unscrewing it. With
the grounding pin removed, it is advised that you use the security wall bracket mount to keep
the speaker from falling out of the wall outlet.
Removing the integrated power supply
A traditional power supply with 6’ feet of cable is integrated into the
cabinet of the wireless speaker. If you wish to remove the power supply
for your installation follow these steps:
1. Remove the 4 Phillips head screws
2. Lift o plastic plate to expose the power supply
3. Remove power supply and cord
4. Unplug the power supply jack at the connector and route the
connector end of the cable though the hole in the plastic plate
5. Reconnect the power cable to the connector in the speaker
6. Replace plastic plate back on the speaker and reinstall the 4
Phillips head screws
Remove 4 Phillips
head screws