Installation manual Metal curtain rod set 1/4 Step 1 A For ceiling brackets see page 3. Toke the wall piece of each bracket out by rotating them counter clockwise [do not unscrew the screw, but the wall piece as a whole. Step 2 A Mount the wall piece to the wall by using at least 2 plugs and screws, which are included in the packaging. Step 3 A Attach the main port of the bracket back on the wall piece by rotating it clockwise.
Installation manual Metal curtain rod set 2/4 Step 4 A Attach the rod(including the curtain) and tighten the brackets by fixing the crestfallen with help of the included Allen key. A cross head screwdriver is needed to fix bracket type Il to the rod.
Installation manual Metal curtain rod set by ) Step 1 B 8 Ceiling brackets are mounted directly to the ceiling 4 and have no separate wall piece. Therefore 2 extra long screws are included. Remove the main part of the bracket by unscrewing the upper Allen. it is also possible to mount a ceiling bracken to the wall. Step 2B Use the plugs and extra long screws to attach the foot of the brackets directly to the ceiling.
Installation manual Metal curtain rod set 4/4 Step 5 All finials are easily attached in the same way by putting the finial over both ends of the rod and tighten them by fixing the Allen. The Allen key is included in the packaging.