Technical data

Seite 3 von 22 EN
5. Before use
Connect with the PC
With the operating systems Windows 98/SE please install a driver before you connect the
player with the PC. (The download is available on the following website: www.intenso.de).
For the operating systems WIN 2000/XP/ME/Vista/Windows 7 the installation of the driver
is not needed.
Please go ahead as follows:
(1) Connect the player with the USB connection of the PC.
(2) The window “Intenso” will open. Now you can save the data from your hard disk on
the removable medium.
Safe removal from the PC
For Windows 2000/XP/ME/Vista/Windows 7:
Click with the right mouse button down right in the task bar on the symbol “Remove
hardware securely”. In the displayed context menu please select the point “Remove USB
mass storage device driver“ with the left mouse button. Please make sure that the data
transmission has been completed.
Now you can remove the device.
For Windows 98/SE:
Select the device in the „device manager“ with the left mouse button. Now click on the
menu point “Remove“. Make sure also here that the data transmission has been
completed.
Now the device can by disconnected from the computer.
Charging batteries
 The Player's battery is automatically charged if the player is connected to the
computer. Please ensure the computer is switched on.
 Within 3 hours approx. 80 % of the battery is charged. After 5 hours the Player is
completely charged. If you use the Player while it is being charged, it’s charging
time will increase.
 Below you find the Player’s different charging states.
Full
2/3 full
1/2 full
Battery
weak
Empty