User manual

Page 6 of 10 EN
3. Starting-Up / Powerbank Charge / Charging
Connected Devices
You can charge the Powerbank using the supplied Micro USB cable, the
supplied USB A to Type C cable, or both cables at the same time.
i) Micro USB In
Connect the supplied Micro USB cable to the Micro USB port (Micro USB
In) of the Powerbank and connect the other end of the USB cable to a
standard USB port of a computer or USB power supply. The required
charging time of the Powerbank depends on the selected charging source
and its output power (max. 5V / 2.1A).
ii) Type C In/Out
Connect the supplied USB A to Type C cable with the Type C port (Type C
In/Out) of the Powerbank and connect the other end of the USB cable to
a standard USB port of a computer or USB power supply. The required
charging time of the Powerbank depends on the selected charging source
and its output power (max. 5V / 2.4A).
iii) Micro USB In and Type C In/Out at the same time
For fast charging the Powerbank, please connect both cables as described
above. The required charging time of the Powerbank depends on the
selected charging source and its output power (together 5V / 4.5A max.).
The charging process and the current charging status are indicated by the
LED status lights. When the Power Bank is fully charged, the LED status lights
are permanently on.
You can also charge the Powerbank with your own cables and power
supplies if the above output capacities are not exceeded.
The Powerbank can also be used to recharge a connected device during the
charging process. However, this has an effect on the charging speeds of both
devices and can lead to increased heat development. Therefore, it should be
omitted.