Technical data

Page 5 of 9 EN
d) Play music directly from the device
To play music directly from the device, please insert a memory card with music saved in
MP3 or WMA format. Now follow the indicated steps below in order to initiate the music
reproduction.
1. Insert the memory card recorded with supported music titles
2. Turn the device on.
3. Press the - button to switch to the SD Card reproduction mode.
4. Press the - button to initiate playback.
5. Press the - button again to pause or continue playback.
6. Briefly press the / - buttons to witch to the next or previous music title.
Keep the button pressed to rewind or fast-forward the title.
7. Keep the / - buttons pressed to adjust the volume.
e) Play music over the Line In connection
1. Connect the USB cable to any desired music source.
2. Turn the device on.
3. Press the - button to switch to the Line In mode.
4. Now start the playback on the connected device.
5. Press the / - button to adjust the volume. Through pressing the -
button, you can mute the device. By pressing the button again, music is reproduced
at the same volume as previously set.