Technical data

Page 7 of 9 EN
h) Set the alarm
The device is equipped with two different alarm modes. If you activate alarm 1, with
inserted memory cart you will be woken up with a musical title of your choice. If the
memory card is not inserted, the standard alarm one will sound. If you activate the alarm
mode 2, you will be woken up with the radio channel of your choice.
Adjustment of Alarm Time.
1. Press the - button, to switch to the alarm mode.
2. Press the alarm 1/2 shortly to display the actually adjusted alarm time. Now hold the
alarm key of 1/2 until the hour display starts flashing.
3. Press the / - buttons to switch between hour and minute. The value to set
is flashing.
4. With the / - buttons the values can be adjusted.
5. Press the - button to activate the alarm. An alarm bell is now indicated in the
display. Press the button again to deactivate the alarm. The alarm bell in the display
fades out.
6. Press the - button to save the selected settings.
Please note:
 If the memory card is inserted, you can adjust an audio file of your choice as alarm
sound. For this purpose, interrupt the audio reproduction of the desired title with the
key play/pause and hold the alarm 1 key until the selection will be confirmed on the
display.
 To select the channel for alarm 2 mode go to the radio mode and hold the alarm 2
key during the reproduction of the desired channel until the selection will be
confirmed on the display.
 The alarm is equipped with a “snooze“ function. If you press the “snooze” key during
the reproduction of the alarm sound, it will sound for 5 minutes without interruption