Technical data

Page 3 of 11 GB
5. Prior to use
Connect to the PC
Please install a driver for OS Windows 98/SE prior to connecting the player with the PC.
(download from www.intenso.de). No driver installation is required for OS WIN
2000/XP/ME/Vista/Windows7.
Please proceed as follows:
(1) Connect the player with the USB-port of the PC
(2) The window "Intenso" opens. Now you can store the data from your hard disk on the
player.
Safe removal from PC
For Windows 2000/XP/ME/Vista/Windows7:
Click with the right mouse button bottom right in the task bar onto the symbol "safe
removal of hardware". Select "remove USB flash drive" with the left mouse button from the
appearing context menu. Please ensure that the data transfer has been finished
completely.
Now you can remove the device.
For Windows 98/SE:
Select the device in the "device manager" using the left mouse button. Now click on the
menu item "remove". Please also ensure here that the data transfer has been finished
completely. The device can now be disconnected from the PC.
Charging the battery:
The device has a built-in re-chargeable Li-polymer battery. The battery is charged via the
USB connection to your PC. Before using the device for the first time, please make sure
that the battery is fully charged. This usually takes about 3 hours.
To charge the battery, connect the device to the PC using the USB cable. The charging
procedure begins automatically.
To check the state of charge, control the symbol on the display of the MP3 player.
Note: for optimum performance, the re-chargeable Li-polymer battery must be used
regularly. If this is not the case, fully charge the battery at least once per month.