Operation Manual Multi Input HD AV Mixer HDMX-1104
MULTI INPUT HD AV MIXER Welcome A personal welcome to you from the management and employees of Inter-M All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products. We sincerely trust this product will provide years of satisfactory service, but if anything is not to your complete satisfaction, we will endeavor to make things right.
MULTI INPUT HD AV MIXER Contents Unpacking .......................................................................................................................................2 Installation Environment....................................................................................................................................2 Important Safety Instructions.............................................................................................................2 Introduction ..................
MULTI INPUT HD AV MIXER Unpacking Although your HDMX-1104 is neither complicated nor difficult to operate, we recommend you take a few minutes to read this brief manual and familiarize yourself with the important information regarding product features, setup and operation. As with most electronic devices, we strongly recommend you to retain the original packaging. In the unlikely event the product must be returned for servicing, the original packaging (or reasonable equivalent) is required.
MULTI INPUT HD AV MIXER Introduction The HDMX-1104 is a FULL HD, 5 channels, broadcast quality AV Mixer (HD-SDI: 1 channel, HD-SDI/HDMI: 3 channels, DVI: 1 channel). The HDMX-1104 satisfies all the requirements of FULL HD quality (Resolution 1920x1080 pixel) and is equipped with various screen transition effects functions such as WIPE, DISSOLVE, FADE IN/OUT, PUSH, SLIDE IN/OUT, PAGE, CHROMA-KEY, PIP, DSK, LOGO records, etc. The HDMX-1104 is designed considering user friendly operability and convenience.
MULTI INPUT HD AV MIXER Front Panel 1 2 3 4 5 6 7 11 12 8 9 1. AUDIO MONITOR JACK AND VOLUME CONTROL - 3.5ø Stereo Phone jack and volume controls which can monitor the audio outputs. 2. AUDIO SIGNAL LED - Displays audio signals presence for each channel. 3. AUDIO LEVEL CONTROL VOLUME - Volume that controls audio levels of each channel. 4. MASTER VOLUME LEVEL LED - Displays master audio level output of the audio mixer.
MULTI INPUT HD AV MIXER 5. SCREEN INVERT PATTERN SELECT SWITCH No. Icon Invert Function Icon Explanations 1 Invert the screen from left bottom to right top. 2 Invert the screen from right bottom to left top. 3 Invert the screen from left to right. 4 Invert the screen from bottom to top. 5 Effect starts from the center and is inverted while expanding to entire screen. 6 Effect starts from the center and is inverted while expanding to both sides.
MULTI INPUT HD AV MIXER 6. PROGRAM CHANNEL SELECT BUTTON - Button selects the channel sent to the main output. If channel is selected, the LED will be on. Video of selected channel will be transmitted to the screen. (Only one channel can be set to the program channel, LED of previous channel will be off.
MULTI INPUT HD AV MIXER 11. SET-UP SWITCH - MENU: when pressed enters the SET-UP mode, and menu list will be displayed on the screen. When in the set-up mode pressing the menu button will exit this mode. - DATA: selects the item to change in the SET-UP mode. - ENT: confirms the setting value. - DEFLT: when pressed in the set-up mode will restore that setting to the initial setting value. - DIAL: change the setting value. * Refer to page 11, Setting Method of SET-UP switch for detail information 12.
MULTI INPUT HD AV MIXER Rear Panel 7 1 2 3 4 5 6 1. POWER INPUT - Power input connector. (Use the provided DC 12V/5A adapter for safe and normal operation.) 2. VIDEO OUTPUT 1) Program Output - Consists of two HD-SDI outputs (75Ω, BNC) and on HDMI terminal. - Main program output. 2) Monitor Output: - Allows the preview of video effects, the status of each input channel and PROGRAM/NEXT screens. 3. DVI INPUT (CH5) - A DVI input used for the DSK input. Uses DVI-1.0 standard. 4.
MULTI INPUT HD AV MIXER 7. TALLY OUT (OPTIONAL RS-232C PORT) - TALLY light function which displays the broadcast status (on air) of camera or VTR, etc. It uses a D-SUB 15 pin. - Open collector output. Internal voltage is DC +30V, maximum currents 50mA. * Tally out: provides on air status to camera LED LAMP. 1 TXD (opt) 2 MD1 (opt) 3 TALLY 1 4 TALLY 3 5 TALLY 5 6 - 7 +12V 8 GND 9 RXD (opt) 10 GND 11 TALLY 2 12 TALLY 4 13 - 14 +12V 15 GND (no.
MULTI INPUT HD AV MIXER Functions and Controls 1. Monitoring Screen ➊ ➋ ➌ ➎ ➐ ➒ ➍ ➏ ➑ ➓ * Above screen shows the example of monitor output screens. 1) PROGRAM Screen - Final output screen. - Icon on the left top identifies the current active output screen. on the right top shows the logo displayed on the output screen. (Refer to page 18 for logo saving.) 2) NEXT Screen - Is the stand-by or next video channel in cue. - Icon on the left top shows that the screen is the NEXT or stand-by screen.
MULTI INPUT HD AV MIXER 5) Channel 3 input screen - Displays the video preview of channel no. 3 input. - Icon on the left top shows that the screen is the NEXT screen in cue. 6) Channel 4 input screen - Displays the video preview of channel no. 4 input. - “C-KEY” on the right top shows that the video is saved into the “C-KEY”. (Refer to page 14 for detail information on C-KEY.) 7) DVI input screen - Displays the video preview of the DVI port.
MULTI INPUT HD AV MIXER 2) Configuration menu screen - Menu screen consists of upper menu showing INPUT/OUT -CH, CHROMA-KEY, PIP and DSK, and sub menu showing setup details (Function and data). - Selected menu will be displayed in yellow, and when changing the DATA, DATA will be displayed in blink dark red. [Upper Menu] [Sub Menu] 3) Basic Control ① Push button, to enter the setup mode. Items related to setup will be displayed on the next screen monitor.
MULTI INPUT HD AV MIXER 4) RECALL Setup < RECALL Setup Screen > - It is used to save the setting values in memory. - Refer to “Save” for saving of setup values. - 10 saved settings can be loaded (1~10). 5) INPUT/OUT -CH Setup < INPUT-CH/OUT Setup > - Setting the video formats of input and output, and change the location of program and next screens from left to right on the monitoring screen. (A) INPUT-1: INPUT-1 is fixed to HD-SDI input, and cannot be changed.
MULTI INPUT HD AV MIXER 6) CHROMA-KEY Setup < CHROMA-KEY Setup > - Sets up the input channel used in CHROMA-KEY and the various setting values. (A) MAT SET-UP: It is used to select the background colors which video is mixed. To use the CROMA-KEY function, background colors should be assigned through this function. (B) CAMERA : Sets the video signal level for the camera for 1~4 steps. (C) LOW-KEY SLICE : Sets the lower slice level of key signal for 1~16 steps.
MULTI INPUT HD AV MIXER (G) POSITION-H: Sets up the location of horizontal direction where PIP video is located on the program screen. It can set up to 0~1440 by 4pixel. (H) POSITION-V: Sets up the location of the vertical direction where PIP video is located on the program screen. It can set up to 0~808 by 4 lines. (I) BORDER COLOR: Sets up the edge color of PIP video.
MULTI INPUT HD AV MIXER ① If only KL is controlled ② If only KU is controlled ③ If KL+KU is controlled ④ If KL+KU+KB is controlled 16 HDMX-1104
MULTI INPUT HD AV MIXER ⑤ If KL+KU+KB+KW is controlled 9) EFFECT SPEED Setup < EFFECT SPEED Setup > - Sets the speed of screen transition effect. (transition speed will be faster as number is larger) (A) WIPEsets the speed of WIPE screen transition effect up to 1~6 by 1 unit. (B) MIX: sets the speed of MIX screen transition effects up to 1~8 by 1 unit. (C) PUSH: sets the speed of PUSH screen transition effects up to 1~6 by 1 unit. (D) SLIDE: sets the SLIDE screen transition effect up to 1~6 by 1 unit.
MULTI INPUT HD AV MIXER 11) Record of Logo / ON/OFF Setting < Record of Logo / ON/OFF Setting > - Sets the logo save, print out of logo and various values. (A) SUPER : Selects whether logo output is ON/OFF. (B) PNo : selects logo to be output. (Max. 2 logos can be saved) (C) KEY SLICE : sets the key slice level of logo. Set up to 0~63 by 1 unit. (D) KEY GAIN : sets the key (Y+C) level of logo. Set up to 1~10 with 1 unit. (E) KEY CLIP : sets the transparency of logo. Set up to 0~255.
MULTI INPUT HD AV MIXER Applications PREVIEW(HDMI) COMPONENT HD-SDI to COMPONENT BLUERAY PLAYER BROADCASTING BLUERAY PLAYER PROJECTOR/SCREEN MONITOR HDMX-1104 19
20 HDMX-1104 5-DVI(D) 4-HDMI 4-HD SDI 3-HDMI 3-HD SDI 2-HDMI 2-HD SDI 1-HD SDI W_CTL W_CTL W_CTL W_CTL W_CTL FRM_BUF FRM_BUF FRM_BUF FRM_BUF FRM_BUF DSK PRCS PIP GEN C-KEY GEN PVW EFFECT MIX B GENERATOR A COMBINER HDMI HDMI HD-SDI OUT HD-SDI PROGRAM OUT MONITOR MULTI INPUT HD AV MIXER Block Diagram
MULTI INPUT HD AV MIXER Specifications HDMX-1104 Video Input signal format HD-SDI;1080i/59.94Hz, 720p/59.94Hz HDMI;1920x1080i/59.94 or 60Hz, 1280x720p/59.94 or 60Hz, HDCP do not support DVI-D;1920x1080i/59.94 or 60Hz, 1280x720p/59.94 or 60Hz, 1360 x768p/60Hz, 1920x1200p/60Hz, R,G,B Signal format, Maximum refresh rate WUXGA(1920x1200/60Hz 154MHz) Input-1 HD-SDI, 0.8Vp-p, 75Ω, BNC Input-2 HD-SDI, 0.8Vp-p, 75Ω, BNC or HDMI, TMDS, Type A (19 pin) Input-3 HD-SDI, 0.
MULTI INPUT HD AV MIXER HDMX-1104 Monitor Output R/L 30mW, 600Ω, 3Pole mini(3.
MULTI INPUT HD AV MIXER ※ DIMENSIONS HDMX-1104 23
MULTI INPUT HD AV MIXER Service Procedures Take steps to insure the problem is not related to operator error or other products within the system. Information provided in the troubleshooting portion of this manual may help with this process. Once it is certain that the problem is related to the product contact your warranty provider as described in the warranty section of this manual. Schematic A Schematic is available by contacting your warranty provider.
HDMX-1104 25
Inter-M, Ltd. (Korea) began operations in 1983. Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world. Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).