Operation Manual Output Transformer Unit OPT-100D
OUTPUT TRANSFORMER UNIT Welcome A personal welcome to you from the management and employees of Inter-M All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products. We sincerely trust this product will provide years of satisfactory service, but if anything is not to your complete satisfaction, we will endeavor to make things right.
OUTPUT TRANSFORMER UNIT Contents Unpacking .......................................................................................................................................2 Installation Environment....................................................................................................................................2 Important Safety Instructions.............................................................................................................2 Features........................
OUTPUT TRANSFORMER UNIT Unpacking Although your OPT-100D is neither complicated nor difficult to operate, we recommend you take a few minutes to read this brief manual and familiarize yourself with the important information regarding product features, setup and operation. As with most electronic devices, we strongly recommend you to retain the original packaging. In the unlikely event the product must be returned for servicing, the original packaging (or reasonable equivalent) is required.
OUTPUT TRANSFORMER UNIT Features - Compact size design It is implemented 100W 2 Channel at Slim Compact Size (1RU, HALF RACK SIZE, DEPTH 280mm) and it can be easily installed at tiny space along with light weight. - High quality output transformer Providing clear and dedicate sound as using high quality of OPT. - Support on 100V and 70V output.
OUTPUT TRANSFORMER UNIT Rear Panel 1 2 CH 2 CH 1 OPT INPUT CH 2 CH 1 70V : 49Ω COM 70V 100V COM 70V 100V 100V : 100Ω SPEAKER OUTPUT CLASS 2 WIRING 1. OPT INPUT FROM AMPLIFIER Connect to 100W / 4Ω 20V amp output. 2. SPEAKER OUTPUT If you want to use 100V output level, it connects 100V with COM. Speaker’s minimum impedance is 100Ω. If you want to use 70V output level, it connects 70V with COM. Speaker’s minimum impedance is 49Ω.
OUTPUT TRANSFORMER UNIT Applications Connect to DSA-100D/DV BRIDGE 8Ω 4Ω CH 2 CH 1 4Ω V2 C2 CLASS 2 WIRING OFF REMOTE G ON INPUT 1 VCA CONTROL C1 V1 REMOTE POWER POWER MODE BRIDGE 2CH AC INPUT HPF OFF ON G GAIN -20dBu +4dBu INPUT 2 SPEAKER OUT G DSA-100D/DV CH 2 CH 1 OPT INPUT CH 2 CH 1 70V : 49Ω COM 70V 100V COM 70V 100V 100V : 100Ω SPEAKER OUTPUT CLASS 2 WIRING OPT-100D ※ NOTE: When connected to the DSA-100D/DV, set the HPF switch to "ON" of the DSA-100D/DV.
OUTPUT TRANSFORMER UNIT Connect to 100V CH 2 CH 1 OPT INPUT CH 2 CH 1 70V : 49Ω COM 70V 100V COM 70V 100V 100V : 100Ω SPEAKER OUTPUT CLASS 2 WIRING OPT-100D Connect to 70V CH 2 CH 1 OPT INPUT CH 2 CH 1 70V : 49Ω COM 70V 100V COM 70V 100V 100V : 100Ω SPEAKER OUTPUT CLASS 2 WIRING OPT-100D 6 OPT-100D
OUTPUT TRANSFORMER UNIT Specifications OPT-100D Rated Output (@1kHz) 100W x 2 Input 20V 100V Output Voltage & Minimum Impedance 100V ±10V / 100Ω 70V Output Voltage & Minimum Impedance 70V ±7V / 49Ω Frequency Response (1W) OPT-100D 80Hz~20kHz (-3dB) OPT-100D + AMP 80Hz~17kHz (-3dB) Operating Temperature / Humidity Weight (Set) Dimensions (Set) -10℃ ~ +40℃ / 0% ~ 90% 4.2kg / 9.3lb 210(W) x 44(H) x 280(D)mm 8.3(W) x 1.73(H) x 11(D)in * Specifications and design subject to change without notice.
OUTPUT TRANSFORMER UNIT 280 ※ DIMENSIONS 5 44 210 177 8 OPT-100D
OUTPUT TRANSFORMER UNIT How to install the rack AMP & BLANK MOUNT . Y NN . Y NN %4" % %7 . Y NN . Y NN 5BLF GFFUT PGG OFBS 'SPOU 1BOFM *OTUBMM 3BDL NPVOU #,5 VTJOH .
OUTPUT TRANSFORMER UNIT AMP & OPT RACK MOUNT 5BLF GPPUT PGG *OTUBMM #,5 VTJOH . 4DSFX . Y NN . Y NN 3&"3 +0*/5 #,5 4&5 #,5 %4" % %7 . Y NN 015 % PS %4" % %7 5BLF GFFUT PGG OFBS 'SPOU 1BOFM *OTUBMM 3BDL NPVOU #,5 VTJOH . TDSFXT #,5 %4" % ' 10 OPT-100D . Y NN .
OUTPUT TRANSFORMER UNIT Service Procedures Take steps to insure the problem is not related to operator error or other products within the system. Information provided in the troubleshooting portion of this manual may help with this process. Once it is certain that the problem is related to the product contact your warranty provider as described in the warranty section of this manual. Schematic A Schematic is available by contacting your warranty provider.
NOTE
Inter-M, Ltd. (Korea) began operations in 1983. Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world. Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).
