Operation Manual PS-80 FIXED-INSTALLATION 5" POWERED SPEAKER
Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Contents Welcome ................................................................2 Unpacking ..............................................................2 Installation Environment.........................................................3 Important Safety Instructions ...............................3 Introduction ..........................................................5 Features...............................................................6 Application ...................................................
Welcome A personal welcome to you from the management and employees of Inter-M All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products. We sincerely trust this product will provide years of satisfactory service, but if anything is not to your complete satisfaction, we will endeavor to make things right.
Installation Environment Never place this product in an environment which could alter its performance or reduce its service life. Such environments usually include high levels of heat, dust, moisture, and vibration. Important SafetyInstructions 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings.
the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Introduction INTER-M PRO SOUND is well-known brand for the professional sound market and supplies full line-up based on Inter-M’s 30 years of R&D research. The brand new PS-80 which supply stable sound through optimized circuit and 170W Amp based on MS-80 received a good response in a market. PS-80 supplies true “PLUG & PLAY” which enjoy high quality sound. Users can install easily without technical knowledge on Amplifier selection and adjustment.
Features ■ High quality, high efficient powered speaker for installation ■ 170W ■ 5″ high efficientcy Amp Module Woofer + 1″ Silk-dome, 2way type ■ 110-120V, ■ Volume 220-230V power adjustment (Line Level,+6dB) ■ Euroblock, ■ Ease standard AC connector installation (rigging, bracket) ■ Natural ■ EASE Sound data Application ■ Main Speaker in small and medium-sized space ■ Down-fill ■ Front-fill speaker in balcony area speaker in local area ■ Conference ■ Restaurant 6 room speaker BGM Sp
Front Panel 4 2 1 3 1 . AUDIO SIGNAl INpUT It's a connector that support Euroblock balance type audio input. It supports ease connection by using sealed Euroblock and it is avaiable high S/N signal input by balance input. 2 . VOlUME CONTROl It's a volume knob of input signal that support infinite ~ maximum input range. Built-in Amp of the speaker includes +6dB amplifying circuit for supporting connect of commercial appliance.
4 . HEAT VENT It’s a section to dissipate the heat generated from built-in Amp of speaker. It’s located on speaker’s rear side. ※CAUTION : If this part is blocked, the equipment’s operation could be unstable, so when it installed, it has to have enough space.
Installation This speaker is reformed as flat sound for commercial fixed installation. If the speaker is installed near the walls or multiple speakers are installed, it might need proper ton control. Selection of install location · Advantage & precaution of wall installation WAL SIDE VIEW TOP VIEW If the speaker is installed near the walls, ton could be changed due to bass sound rises. Even if it doesn’t affect on playing BGM much, proper bass control is needed for ensuring clarity of sound.
· Advantage & precaution of ceiling installation CEILING SIDE VIEW FRONT VIEW Install a speaker on the ceiling tightly causes increasing low low-pitched sound as installed closed to the walls. Even if it generates soft tone, the sound clearness may be dropped. Recommend to control the tone by EQ on external panel. The bracket which sells separately with main product is the best way to install the speaker on the wall. The user can change angles easily with the angle control function.
· Advantage & precaution of ceiling installation Install the speaker at the corner of the ceiling or wall causes lots of energy increase. For listening accurate sound, tone control by EQ is necessary. Do not recommend to install at piled up space, but if the user can improve the sound control by EQ, it doesn’t matter the location of installation.
Wall bracket usage · Bracket Components 1. ㄷ shape bracket 2. Speaker conncting volt (M6) X 2 3. Speaker connecting flat washer x 2 4. Speaker connecting spring washer x 2 ※CAUTION : Before install the bracket, the users have to have additional devices fitted at mounting environment. The bracket function is only for speaker fixation, it doesn’t supply additional function by environment. Furthermore, separate hex wrench(4mm) is needed for bolt connection. · Bracket Installation 1.
Connection Cable connection ※CAUTION : The speaker is designed as fixed installation, it doesn’t supply separate AC power switch. For avoiding extra noise, connect the audio cable first, and then connect power cable with minimized volume. Built-in Amp type speaker’s power ON/OFF will be more efficiency using Sequencial Power Supply like Inter-M’s ‘SPAC-660’. For reference, the speaker is designed to be compensated low power consumption, when audio signal doesn’t exist.
Operation level Setting Installed speaker offers volume control for proper level setting. Signal input has built-in +6dB amplifier circuit for corresponding to low output devices. For setting up with proper volume by turning clockwise.
Specifications pS-80 General Specifications Type FIXED-INSTALLATION, 5" POWERED SPEAKER Frequency Range (-10dB) 60Hz~20kHz Frequency Response (-3dB) 67Hz~20kHz Sensitivity 88dB Max. SPL 113.1dB Coverage 120° conical LF Driver 130 mm (5 in) driver with 50.8 mm (2 in) voice coil HF Driver 25 mm (1 in) exit compression driver, 34.4 mm (1.
Service procedures Ensure the problem is not related to operator error, or external system devices, Once it is certain that the problem is related to the product contact your warranty provider as described in the warranty section of this manual. Schematic A Schematic is available by contacting your warranty provider. parts list A Parts List is available by contacting your warranty provider. Warranty Warranty terms and conditions vary by country and may not be the same for all products.
NOTE
Inter-M, Ltd. (Korea) began operations in 1983. Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world. Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).
