Owner's manual

3
RM-05A
REMOTE AMP WITH ZONE SELECTOR
Features
Features
- SPEAKER LINE CONTROL
Speaker zone of PAM-240A/360A, PCT-610/620 can be controlled by RM-05A.
- CHIME AND TALK FUNCTION
There are 4 levels of chime in PAM-240A/360A, PCT-610/620 which can be triggered by Chime/Talk
Switch, and after chime is finished, announcement from mic will be made while pushing switch button.
- OUTPUT LEVEL METER
10 segments LED display on the front panel indicates signal output level of RM-05A at real time.
- MIC BROADCASTING
Highly sensitive condenser type Mic is used for clear broadcasting.
- EXCLUSIVE USE FOR PAM-240A/360A, PCT-610/620
RM-05A is the dedicated remote control amplifier for PAM series, so it only can be used with PAM-
240A/360A, PCT-610/620.
- MUTE FUNCTION FOR CHIME OUT
Chime melody can be muted by simple operation.
Operating Procedure
Operating Procedure
1. Ensure the Power Switch is selected to the on position.
2. Select which channel or combination of channels you wish to address by selecting the required CH1-CH5
buttons.
3. To address all the channels select the all button.
4. The CH1-CH5 and All buttons are latching type, when selected a LED lights to show the selection you have
made.
5. When you are ready to make your address, press the Talk Switch and speak into the microphone.
6. Pressing the Talk Switch will also activate the Pre Announcement Chime facility (for set up details see
instructions later in this manual)
7. The microphone output level can be adjusted using the level control located next to the gooseneck microphone
connector.
8. After completion of the address the selected CH1-CH5 or All buttons must be deselected clearing the
microphone ready for the next selection.
RM-05A_E 2010.3.24 9:2 AM 페이지 6