Owner's manual

6
RM-05A
REMOTE AMP WITH ZONE SELECTOR
Rear Panel
Rear Panel
1. REMOTE CONNECTION CABLE CONNECTOR
Used to connect the RM-05A to the host amplifier PAM-240A/360A, PCT-610/620.
* Refer to pin number as below
You can use conveniently Remote Control (Speaker zone can be selected and chime can be operated)
through the D-SUB jack (15 pin)
* Remote cable length must be used within 3 meter (cable 3m)
12345678
9
101112131415
Pin 1 : Remote amplifier input signal hot (+) Pin 10 : DC +24V
Pin 2 : Remote amplifier input signal cold (-) Pin 11 : Remote chime
Pin 3 : Signal ground Pin 12 : NC
Pin 4 : Remote control 1 (SP1) Pin 13 : NC
Pin 5 : Remote control 2 (SP2) Pin 14 : NC
Pin 6 : Remote control 3 (SP3) Pin 15 : NC
Pin 7 : Remote control 4 (SP4)
Pin 8 : Remote control 5 (SP5)
Pin 9 : Remote control ground
RM-05A_E 2010.3.24 9:2 AM 페이지 9