Brochure

Telephone Paging
A
telephone paging input allows the ARM-911
to be connected to the paging port of a PBX.
This allows the use of any authorised telephone
to connect to the ARM-911 to make direct live
voice announcements. A DTMF decoder can
trigger any of the 10 messages, activated using
the dial pad of the phone.
FEATURES
•High fidelity scalable audio for excellent speech intelligibility.(MP3,WAV & WMA)
•Balanced audio output (variable output with -50dB/600Ω mic level, -10 line and +4dB selector)
•SD Memory Playback (2GB)
•Redundant Flash memory, no battery backup required
•Non-Volatile SD Card memory (2GB)
•Multi-message(4) sequencing capability
•Timer scheduled payback (can be used for electronic School bell or automated message playing)
•Crystal clear 24 bit audio quality
•Over 20 Minutes of audio storage capacity
•Up to 20kHz bandwidth
•10 message front panel start selections and status
•Optically coupled 10 Contact Closure and RS232 for control and status
•Fault input monitoring and alarm via 5V, reverse DC voltage with a line matching resistor at the EOL.
•Fault output monitoring.
•Message playback output monitoring
•Web-browser Configuration
•Source Priority setup via web-browser
•Source level, HPF and EQ adjust via web-browser
•Output Level Adjust via web-browser
•Up to 4 Remote paging mics
•Telephone paging trunk input
•Internal program scheduler
•Scheduled playback of any of the 10 recorded messages and other via web-browser up-loadable files.
•24VDC Back up
•Industrial grade all metal construction, shock and vibration resistant
•Rack mount (1U)
Feature DTMF Code Action
1 * + 00 + # Voice page
2 * + 01 + # Playback Message 1
3 * + 02 + # Playback Message 2
4 * + 03 + # Playback Message 3
5 * + 04 + # Playback Message 4
6 * + 05 + # Playback Message 5
7 * + 06 + # Playback Message 6
8 * + 07 + # Playback Message 7
9 * + 08 + # Playback Message 8
10 * + 09 + # Playback Message 9
11 * + 10 + # Playback Message 10
12 * + 99 + # Cancel Message