Operation Manual Professional Power Amplifier V2-1000/2000/3000/4000
PROFESSIONAL POWER AMPLIFIER Welcome A personal welcome to you from the management and employees of Inter-M All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products. We sincerely trust this product will provide years of satisfactory service, but if anything is not to your complete satisfaction, we will endeavor to make things right.
PROFESSIONAL POWER AMPLIFIER Contents Unpacking .......................................................................................................................................2 Short Form Instructions .................................................................................................................2 Installation Environment....................................................................................................................................
PROFESSIONAL POWER AMPLIFIER Unpacking Please take a few minutes to read this manual to familiarize yourself with important information regarding installation, product features, and operation. As with most electronic devices, original packaging (or equal) is required in the unlikely event that the product needs to be returned for servicing. Short Form Instructions 1. Do not connect the AC power until step 6. The ac mains power switch should be in the off position. 2.
PROFESSIONAL POWER AMPLIFIER Installation Environment Never place this product in an environment which could alter its performance or reduce its service life. Such environments usually include high levels of heat, dust, moisture, and vibration. IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings.
PROFESSIONAL POWER AMPLIFIER Description - V2-1000 A 2U rack space, 2 channel amplifier capable of 1150W into 4Ω load(bridged mono). - V2-2000 A 2U rack space, 2 channel amplifier capable of 1850W into 4Ω load(bridged mono). - V2-3000 A 2U rack space, 2 channel amplifier capable of 3300W into 4Ω load(bridged mono). - V2-4000 A 2U rack space, 2 channel amplifier capable of 4200W into 4Ω load(bridged mono). ※ The output power can be changed in relation to the AC supply voltage.
PROFESSIONAL POWER AMPLIFIER Front Panel 1 2 3 4 5 6 7 1. HANDLES These are provided for easy transporting and installing into equipment enclosures or racks. 2. SCREW FOR DUST FILTER REMOVAL To avoid unnecessary dust particles being drawn into amplifier, a removable dust filter has been fitted to the front panel. 3. LEVEL CONTROL This control adjusts the level(amplitude) of the input signal for each channel.
PROFESSIONAL POWER AMPLIFIER 7. POWER SWITCH V2-Series have a combination AC switch/circuit breaker. The position of this switch determines whether the AC mains power is on or off. The power-on status is confirmed by the illuminated power indicator. Also this is used for a circuit breaker to protect AC mains power and the amplifier from abnormal operations due to overload or malfunction. If the current flows over the circuit breaker's rating, the circuit breaker is tripped.
PROFESSIONAL POWER AMPLIFIER Rear Panel 1. AC CORD Connect this product to an appropriate AC main power source. 2. OUTPUT CONNECTORS 4 Pole speaker sockets are provided. Bridged mono operation requires a different method of connecting the speaker cables than stereo operation. Be sure that the amplifier is in the correct mode before connecting the speaker load. Please refer to the output connection drawings. 3.
PROFESSIONAL POWER AMPLIFIER 6. BALANCED XLR INPUT CONNECTORS Each input channel is equipped with a XLR connector. You can use either balanced or unbalanced connectors, but recommend using unbalanced only for a short distance between equipment to avoid a noise problem. Please refer to the input connection drawings. 7.
PROFESSIONAL POWER AMPLIFIER Applications Stereo Installation Parallel Installation V2-1000/2000/3000/4000 9
PROFESSIONAL POWER AMPLIFIER Applications Bridged Mono Installation Linked Installation In V2-Series, Linking is possible when in Stereo/Parallel or Bridged Mono operation.
PROFESSIONAL POWER AMPLIFIER Applications Connections Inter-M products are wired according to professionally accepted wiring practices used throughout the world. 1. XLR INPUTS Balanced XLR connectors are wired as described: Pin #1 Shield Pin #2 Positive Pin #3 Negative XLR MALE 2.
PROFESSIONAL POWER AMPLIFIER 3. OUTPUTS Bridged Mono operation has a minimum load impedance of 4Ω.
PROFESSIONAL POWER AMPLIFIER Block Diagrams Diagram V2-1000/2000 V2-3000/4000 V2-1000/2000/3000/4000 13
PROFESSIONAL POWER AMPLIFIER Specifications 0dB=1V V2-1000 V2-2000 V2-3000 V2-4000 120VAC 230VAC 120VAC 230VAC 120VAC 230VAC 120VAC 230VAC Continuous Average Output Power Per Channel Stereo Mode 8Ω (T.H.D 0.1%) 190W 180W 320W 300W 550W (1kHz, Both Channels Driven) 4Ω (T.H.D 0.1%) 340W 320W 550W 530W 1000W 1000W 1300W 1300W 2Ω (T.H.D 0.5%) 580W 580W 900W 900W 1600W 1650W 2000W 2100W 8Ω (T.H.D 0.1%) 720W 700W 1150W 1100W 2000W 2000W 2600W 2600W 4Ω (T.H.D 0.
PROFESSIONAL POWER AMPLIFIER Specifications (U.K/Australia Version) 0dB=1V V2-1000 V2-2000 V2-3000 V2-4000 240VAC 240VAC 240VAC 240VAC 8Ω (T.H.D 0.1%) 170W 280W 500W 650W (1kHz, Both Channels Driven) 4Ω (T.H.D 0.1%) 300W 500W 900W 1150W 2Ω (T.H.D 0.5%) 500W 850W 1400W 1800W 8Ω (T.H.D 0.1%) 650W 1000W 1800W 2400W 4Ω (T.H.D 0.
NOTE Service Procedures Ensure the problem is not related to operator error, or external system devices, Once it is certain that the problem is related to the product contact your warranty provider as described in the warranty section of this manual. Schematic A Schematic is available by contacting your warranty provider. Parts List A Parts List is available by contacting your warranty provider.
V2-1000/2000/3000/4000 20
Inter-M, Ltd. (Korea) began operations in 1983. Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world. Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).
