Manualshelf

User's Manual

ManualsBrandsInteractive Toy Concepts ManualsElectronics2.4G Flier
12
1. Use a Philips screwdriver (not included) to unscrew the
Battery Compartment Door's retaining screw at the rear of
the HeliQuad Controller.
2. Open the Battery Compartment Door on the back of the
HeliQuad Controller by sliding it down.
3. Insert the 3 AA batteries as shown. Make sure to respect
the polarity.
4. Replace the Battery Compartment Door and tighten the
screw with your Philips Screwdriver.